Ticona Compel LFRT-长纤维增强塑料可挤出和压塑

To extend your range of processing possibilities and to allow you to reap the benefits of very high modulus and extra high impact strength, Compel long fiber reinforced thermoplastic (LFRT) is an excellent material for extrusion compression molding. 

Compel LFRT products are made using a process that thoroughly wets out the glass fibers and delivers optimal reinforcement to the plastic matrix. Unlike conventional short-fiber reinforced materials, the longer fibers present in molded parts of Compel LFRT mechanically interact with each other to form an internal glass fiber “skeleton” that limits anisotropic shrinkage and greatly reduces warpage. Standard fiber length of Compel LFRT is 25 mm, somewhat longer than the 10 mm fiber used in Celstran® LFRT. The result is even higher impact strength.

Glass and carbon fibers are used to deliver the property balance required for a wide range of demanding uses. Polymer feedstock is typically polypropylene and nylon and all grades are heat-stabilized.

The combination of mechanical properties, creep and very high impact resistance, and low warpage imparted by LFRT products make them suitable candidates for metal replacement.  Typical applications include automobile front ends, instrument panel support brackets and control panels.

如果您想充分发挥加工工艺潜力，并在模量和抗冲上有更进一步的突破，Compel® LFRT（长纤维增强热塑性塑料）将是您理想的选择。它具有更长的增强纤维，并适用于挤出/压塑成型工艺

Compel LFRT产品的制备工艺使长纤维在制备中被充分浸润，从而为塑料基体提供了优化的增强效果。与常规的短纤增强材料不同，Compel LFRT部件中具有更长的增强纤维，而且它们相互缠绕，形成了一种纤维骨架，它能限制各向异性收缩，显著降低翘曲。Compel LFRT的玻纤标准长度是25mm，比Celstran® LFRT中使用的10mm的玻纤更长。其结果是它具有更优越的抗冲强度

它通过使用玻纤和碳纤来提供满足各种苛刻应用的综合性能。典型的基体塑料为聚丙烯或尼龙。所有牌号都是热稳定级。

综合其优异的力学、抗冲击、抗蠕变和低翘曲等性能，LFRT产品是金属替代材料的理想候选者。典型应用包括汽车前端、仪表板骨架和控制面板。

为什么你需要Ticona工程塑料Compel LFRT,请看泰科纳工程塑料Compel LFRT的应用