全国免费咨询热线
0755-21385289
PPS具有机械强度高、耐高温、高阻燃、耐化学药品性能强等优点;具有硬而脆、结晶度高、难燃、热稳定性好、机械强度较高、电性能优良等优点。 是工程塑料中耐热性较好的品种之一,热变形温度一般大于260度、抗化学性仅次于聚四氟乙烯,流动性仅次于尼龙。还具有成型收缩率小(约0.08%),吸水率低(约0.02%),防火性好、耐震动疲乏性好等优点。
Torayca A512-X02N3
Toray Resin Company PPS
Torayca A512-X02N3 is a Polyphenylene Sulfide (PPS) product filled with 10% carbon fiber. It is available in Asia Pacific, Europe, or North America....
TORELINA PPS Resin
Toray PPS resin is a thermal engineering plastic. Types of PPS resin include both the cross linked and linear type.
Toray engages in total production from base polymers to compounds, offering a wide variety of grades.
Features
Heat resistant
Outstanding long-term heat resistance properties (UL temperature index 200-240°C, UL File No. E41797).
Dimensional stability
Minimum molding contraction rate and coefficient of linear thermal expansion with low moisture absorption means outstanding dimensional stability even at high temperature and high humidity.
Chemical resistance
Outstanding chemical resistance on a par with fluoroethylene resin.
Mechanical properties
The resins offer high strength and high rigidity with minimum decline in characteristics at high temperatures. Outstanding anti-fatigue and anti-creep properties.
Flame retardant
Confirms with UL94V-0 without inclusion of flame retardant agents (UL File No. E41797).
Electrical properties
Offers outstanding electrical properties at high temperature, high humidity and high frequencies.
Molding properties
Outstanding fluidity allows extrusion molding on a level with standard engineering plastics.
Remarks for Handling
Safety Precautions
Refer to the Material Safety data sheet for TORELINA before use.
Small amount of hazardous gases which may irritate eyes, nose and throat may be released. Use adequate local exhaust ventilation during drying and molding.
Sweep up and dispose of spilled resin to eliminate slipping hazard.
Don't pile bags too high in order to avoid injury caused by falling of the product.
Care in Handling
Be certain to pre-dry before using TORELINA under following condition.
Drying condition : 3hrs at 130°C (actual temperature) using a hot-air dryer.
This bag consists of an inner bag (PE) and outer bag (paper) that can be separated with ease. The design makes it easy to recycle the materials.
上一篇:
深圳市易欣园塑料化工有限公司
Q Q:405975917
电话: 0755-21385289
手机:13790212223(雷先生)
手机: 13790392935(易小姐)
邮箱:[email protected]
地址:深圳市光明新区公明街道合水口新村一排一巷5055号信天大厦704
深圳市易欣园塑料化工有限公司是过去8年间与客户一起成长过来的易明塑胶原料。现正式更名为深圳市易欣园塑料化工有限公司,从而发展成高尖的塑化公司,长期经营PC工程塑料、ABS工程塑料、ASA塑胶原料、PVC塑胶原料、PET工程塑料等材料。公司的核心业务是开发、生产和销售塑料、橡胶、特殊化学品和化学中间体产品。此外,易欣园还帮助客户开发、实施定制的系统解决方案。
深圳市易欣园塑料化工有限公司
电话:+86 0755-21385289
手机:13790212223(雷先生)
手机:13790392935(易小姐)
地址:深圳市光明新区公明街道合水口新村一排一巷5055号信天大厦704